Eaton Marine Solutions - TechnologyThe harsh environmental conditions and the critical nature of the protected equipment set special dependability requirements for marine UPSs.
All Eaton marine UPSs are designed to meet the most stringent industry standards. The double-conversion online topology with a static bypass switch is Eaton’s choice for marine use. This protects against all types of power disturbances that may occur in the supplying network and is the only topology that meets the highest performance class, VFI-SS-111, requirements. All Eaton UPSs are tested and certified to meet appropriate safety and EMC standards.
Eaton UPSs are built into one cabinet that houses all the electronics: the rectifier, the inverter, the static bypass and the microprocessor control. This configuration allows the entire system to be controlled as on integral device, and leads to higher reliability when compared to using separate power converters. It also saves plenty of valuable space.
Picture 1. Online UPS
The most critical loads may require increased protection. Therefore all 3-phase systems can be connected to parallel redundant configuration.
In such a system two or more UPSs are supplying and sharing the same load. Should a failure occur in any of the UPS units, the faulty unit is automatically disconnected from the load and the remaining unit or units continue to supply the load. This redundancy leads to extremely high system level reliability.
System performance monitoring is often crucial for continuous operation. Therefore a versatile combination of remote communication options via serial communication ports and potential free contacts are available.
Picture 2. Parallel redundant system
ApprovalsEaton has been working for system testing and certification with
- Lloyd’s Register of Shipping
- American Bureau of Shipping (ABS)
- Det Norske Veritas (DNV)
- Germanischer Lloyd
- Bureau Veritas
- Korean standard
Listado de productos
- PC, Estación de Trabajo y AV Doméstico
- Eaton 3S (550-750 VA)
- Eaton 5S (550 - 1500VA)
- UPS de Red y de Servidor
- Eaton 5SC (500 - 1500VA)
- Eaton 5P (750-3000 VA)
- Eaton 5P Rack (550-3000 VA)
- Eaton 5PX (1000-3000 VA)
- Eaton 9130 (700-3000 VA)
- Eaton 9130 RM (700-3000 VA)
- Eaton 9PX (2-3 kVA)
- Eaton 9PX (5-11 kVA)
- Eaton 9170+ (3-18 kVA)
- Eaton 9155 (8-15 KVA)
- UPS de Centro de Datos e Instalación
- BladeUPS (12-60 kW)
- Eaton 9355 (10-40 kVA)
- Eaton 93E (20 - 60 kVA)
- Eaton 93PM (50-100 kW)
- Eaton 9390 (40-160 kVA)
- Eaton 9390IT (40 kVA)
- Power Xpert 9395 (225-1100 kVA)
- Energía de Corriente Contínua