Eaton 9390 UPS Technical Specs

 Standard UPS
 Standard external battery
 Standard accessories
UPS output power rating (0,9 p.f.)
kVA 40 60 80 100 120 160
kW 36 54 72 90 108 144
General
Efficiency in double conversion mode (full load) 94%
Efficiency in double conversion mode (half load) 92,5%
Efficiency in Energy Saver System (ESS) up to 99%
Distributed paralleling with Hot Sync technology 6 + 1
Field upgradeable yes
Inverter/rectifier topology transformer-free IGBT with PWM
Audible noise < 65 dB
Altitude (max) 1000 m without derating (max 2000 m)
Input
Input wiring 3 ph + N + PE
Nominal voltage rating (configurable) 220/380, 230/400, 240/415 V 50/60 Hz
Input voltage range Low -20% at 100% load/-50% at 50% load without battery discharge; High +10%/max +20%
Input frequency range 45-65 Hz
Input power factor 0,99
Input ITHD less than 4,5%
Soft start capability Yes
Internal backfeed protection Yes
Output
Output wiring 3 ph + N + PE
Nominal voltage rating (configurable) 220/380, 230/400, 240/415 V 50/60 Hz
Output UTHD <3% (100% linear load); <5% (reference non linear load)
Output power factor 0,9 (e.g. 72 kW at 80 kVA)
Permitted load power factor 0,7 lagging - 0,8 leading
Overload on inverter 10 min 100-110%; 30 sec 110-125%; 10 sec 125-150%; 300 ms >150%
Overload when bypass available Continuous 100-110%, 10 min 110-150%, 5 ms 1000% Note! Bypass fuses may limit the overload capability
Battery
Type Maintenance free VRLA batteries, NiCd
Charging method ABM technology or Float
Temperature compensation Optional
Battery nominal voltage (lead-acid) 480 V (40 x 12 V, 240 cells)
Charging current / Model
Default A
Max* A
40
10
20
60
20
40
80
20
40
100
30
60
120
30
60
160
40
80
*May be limited by maximum UPS input current rating
Accessories
  External battery cabinets with long-life batteries, X-Slot connectivity (Web/SNMP, ModBus/Jbus, Relay, Hot Sync, ViewUPS-X remote display), Hot Sync parallel tie cabinet, integrated manual bypass up to 80 kVA, external maintenance bypass switch
Communications
X-Slot 4 communication bays
Serial ports 1 available
Relay inputs/outputs 6/3 programmable
Compliance with standards
Safety (CB certified) IEC 62040-1, IEC 60950-1
EMC IEC 62040-2
Performance IEC 62040-3

In the interests of continuous product improvement all specifications are subject to change without notice.

Standard UPS
Part number Description Rating Dimensions (HxWxD) Weight
1028510 9390-40-N-4x0 40 kVA / 36 kW 1879x519x808 mm 257 kg
1028511 9390-60-U-4x0 60 kVA / 54 kW 1879x519x808 mm 313 kg
1028512 9390-80-N-4x0 80 kVA / 72 kW 1879x519x804 mm 313 kg
1028513 9390-100-U-4x0 100 kVA / 90 kW 1879x944x804 mm 430 kg
1028514 9390-120-N-4x0 120 kVA / 108 kW 1879x944x804 mm 430 kg
1028515 9390-120-U-4x0 120 kVA / 108 kW 1879x944x804 mm 530 kg
1028516 9390-160-N-4x0 160 kVA / 144 kW 1879x944x804 mm 530 kg
Standard external battery
1025570 9390-BAT10-S-40x38Ah (250A) 38 Ah 1877x575x773 mm 700 kg
1025572 9390-BAT10-S-200 (250A) 200 W 1877x575x773 mm 1176 kg
1026327 9390-BAT10-S-205 (250A) 205 W 1879x1125x808 mm 1270 kg
1025467 9390-BAT10-280 (250A) 280 W 1879x1125x808 mm 1444 kg
1025468 9390-BAT10-500 (250A) 500 W 1879x1125x808 mm 2188 kg
1025469 9390-BAT10-280 (400A) 280 W 1879x1125x808 mm 1444 kg
1025470 9390-BAT10-330 (400A) 330 W 1879x1125x808 mm 1625 kg
1025471 9390-BAT10-500 (400A) 500 W 1879x1125x808 mm 2188 kg
Standard accessories
1021887 External Bypass Switch 60-80 kVA (wall-mount) wall 840x380x130 mm 17 kg
1021888 External Bypass Switch 120 kVA (wall-mount) wall 1040x560x130 mm 25 kg
1024626 External Bypass Switch 160 kVA (wall-mount) wall 1040x560x130 mm 25 kg
1025476 SPM-60-2 wall 700x500x250 mm 50 kg
1023540 SPM-80-4 floor 1530x520x788 mm 230 kg
1024687 9390 Tie Cabinet 3x120 kVA floor 1879x519x808 mm 217 kg
1024506 9390 Tie Cabinet 3x160 kVA floor 1879x519x808 mm 217 kg