Eaton 9355 UPS 20 and 30 kVA Technical Specs

Battery Runtimes
Model Selection Guide
Options
X-Slot Connectivity Options
Technical Specifications for 20 and 30 kVA1
Power
Ratings (kVA/Watts) 20 kVA/18 kW and 30 kVA/27 kW at 0.9 power factor
Topology Double conversion
Electrical Input
Nominal input voltage  208V/120V, 220V/127V +10, -15% 480V/277V, 600V (480+600 with transformer) 400V models also available
Operating frequency  50/60 Hz (45 to 65 Hz)
Input power factor  0.99 typical
Input current distortion  <5% THD
Electrical Output
Nominal output voltage   208/120, 220/120 Vac
Output voltage regulation ±1% static; ±4% dynamic with 100% step load recovery within 1 ms response time
Efficiency 91%, typical
Heat dissipation (BTU/hr) 20 kVA models
6,762 @ 208V and 220V input
10,450 @ 480V and 600V (with input isolation transformer)
30 kVA models:
9,220 @ 208V and 220V input
13,831 @ 480V and 600V (with input isolation transformer)
Battery
Battery type 9 Ah, sealed, lead-acid, maintenance-free
Battery runtime See battery backup time chart
Battery replacement Field-replaceable
Charger Default is 8A
General
Diagnostics Full system self-test at startup
UPS bypass Automatic on overload or UPS failure
Parallel for redundancy Yes, using Powerware Hot Sync technology and capacity
Dimensions and weights See model selection table
Overload 150% for 5 sec / 125% for 1 min (online),
110% for 10 min
Communications
LCD display Graphical LCD with blue backlight
LEDs  (4) LEDs for notice and alarm
Audible alarms Yes
Communication ports (1) RS-232, (1) relay contact, (1) REPO, (2) environmental input
Communication slot (2) X-Slot communication bays
Power management software Bundled Software Suite CD
Environmental
Operating temperature 50–104ºF (10–40ºC), 45ºC with 7.5% derating; Optimal battery performance: 77ºF (25ºC)
Storage temperature 32–77ºF (0–25ºC); Recommended battery storage: 59–77ºF (15–25ºC)
Relative humidity 0–95%, non-condensing
Audible noise <58 dBA at 1 meter depending on load
Altitude <3000m
Certifications
Safety certifications IEC 62040-1-1, IEC 60950, EN 62040-1-1, UL 1778, NOM-0190SCP8-1993
EMC compliance EN 50091-2 Class A
Quality ISO 9001: 2000 and ISO 14001:1996
Markings UL, cUL, NOM-NYCE

1. Due to continuous product improvements, program specifications are subject to change without notice.

Battery Run Times (in minutes)

 VA  Watt  UPS
 + Internal
1 Battery
 Internal
Battery +
EBC - 36
 Internal
Battery +
(1) EBC - 72
  Internal
Battery +
(2) EBC - 72
 30000 27000 11 31 56 89
29000 26100 11 33 58 90
28000 25200 12 35 60 93
27000 24300 12 38 62 95
26000 23400 13 40 65 98
25000 22500 14 43 68 101
24000 21600 14 46 71 103
23000 20700 15 48 74 106
22000 19800 16 51 76 109
21000 18900 17 53 79 111
20000 18000 18 56 82 114
19000 17100 19 58 85 117
18000 16200 20 62 88 120
17000 15300 22 66 92 130
16000 14400 24 71 96 142
15000 13500 26 75 101 154
14000 12600 28 79 105 166
13000 11700 31 84 110 178
12000 10800 35 88 114 201
11000 9900 38 94 119 256
10000 9000 42 101 134 251
7500 6750 58 117 188 347
5000 4500 90 188 294 543

Note: Backup times are approximate and may vary with equipment, configuration, battery age, temperature etc.

Model Selection Table

Power
Rating (kVA/kW)1

Input/Output
Voltage
Feed UPS Part Number2 Options Cabinet(s) Base Runtime3 Dimensions
(HxWxD, in.)
Weight
(lb.)4
20/18 208/208 Single KB2013100000010 None 18 66 x 20 x 34.1 1160
20/18 208/208 Single6 KB2013100000010 KBT0011000000105
KBT001100000010
18 66 x 40 x 34.1 1695
20/18 208/208 Dual6 KB2013100000010 KBT0021000000105 18 66 x 60 x 34.1 2230
20/18 220/2207 Single KB2013200000010 None 18 66 x 20 x 34.1 1160
20/18 480/208 Single KB2013100000010 KBT0012000000105
KBT002200000010
18 66 x 40 x 34.1 1695
20/18 480/208 Dual KB2013100000010 KBT0012000000105 18 66 x 60 x 34.1 2230
20/18 600/208 Single KB2013100000010 KBT001300000010
KBT0013000000105
18 66 x 40 x 34.1 1695
20/18 600/208 Dual KB2013100000010 KBT002300000010
KBT0012000000105
18 66 x 60 x 34.1 2230
20/18 480/480 Single KB2013100000010 KBT0032000000105 18 66 x 60 x 34.1 2230
30/27 208/208 Single KB3013100000010 None 11 66 x 20 x 34.1 1160
30/27 208/208 Single6 KB3013100000010 KBT0011000000105
KBT0011000000105
11 66 x 40 x 34.1 1695
30/27 208/208 Dual6 KB3013100000010 KBT002100000010 11 66 x 60 x 34.1 2230
30/27 220/2207 Single KB3013200000010 None 11 66 x 20 x 34.1 1160
30/27 480/208 Single KB3013100000010 KBT0012000000105
KBT0012000000105
11 66 x 40 x 34.1 1695
30/27 480/208 Dual KB3013100000010 KBT002200000010 11 66 x 60 x 34.1 2230
30/27 600/208 Single KB3013100000010 KBT001300000010
KBT0013000000105
11 66 x 40 x 34.1 1695
30/27 600/208 Dual KB3013100000010 KBT002300000010
KBT0012000000105
11 66 x 60 x 34.1 2230
30/27 480/480 Dual KB3013100000010 KBT003200000010 11 66 x 60 x 34.1 2230

1. 50/60 Hz auto-sensing.
2. An input neutral is required for all configurations unless the input isolation transformer is used. For parallel systems, change the fifth CTO digit to a 2 and include parallel tie cabinet.
3. All models include internal batteries.
4. Add 50 lb. to determine shipping weight.
5. Contains on-board maintenance bypass.
6. With isolation transformer.
7. 220V units are wye connected 220/127V input and 220/127V output, three-phase, four-wire plus ground

Options

Description Part Number Input/Output
Voltage (V)
Dimensions (H x W x D, inches) Weight (lb)
Two-string line and match battery cabinet (36 batteries) 103005183 N/A 66.0 x 20.0 x 34.1 1105
Four-string line and match battery cabinet (72 batteries) 103004868 N/A 66.0 x 20.0 x 34.1 2060
Option cabinet containing maintenance bypass (no transformer) KBT000000000010 208/208 67.0 x 20.0 x 34.1 205
Wall-mount parallel tie cabinet (two-breaker MBP)1, 3 124100026-001 208/208 48.0 x 20.0 x 5.8 150
Remote monitor display panel2 103002687-001 N/A N/A N/A
Remote EPO switch (wall mounted) 103002939 N/A N/A N/A
Zone 4 seismic kit 103004896 N/A N/A N/A
Spare parts kit 106711170 N/A N/A N/A
20 to 30 kVA upgrade 103004901 N/A N/A N/A
Upgrade to a parallel UPS module UP08N-PAR N/A N/A N/A
Three-breaker maintenance bypass panels
225A Bus, 200A Neutral, and 125A MBP, MIB, 110A MIS3 124100028-001 208/208 48.0 x 20.0 x 5.8 120
With integral 120 KA TVSS
(100A Bus, 200A Neutral, and 60A MBP, MIB, MIS)3
124100028-002 208/208 60.0 x 20.0 x 5.8 120
With 36-pole distribution provisions (Cutler-Hammer GHB 65 kAIC, or GBHW 22 kAIC and BAB 10 kAIC only)3 124100028-003 208/208 72.0 x 20.0 x 5.8 210
With 36-pole distribution provisions and integrated TVSS (Cutler-Hammer GHB 65 kAIC, GBHW 22 kAIC and BAB 10 kAIC only)3 124100028-004 208/208 90.0 x 20.0 x 5.8 225

1. 400A Bus, 200A Neutral, (1) 350A MBP and (4) 110A MIS.
2. Requires Industrial Relay and Display Card. See X-Slot Connectivity Options table
3. Add 40 lb. for shipping weight of panels and 50 lb. for panels with panelboard provisions.

X-Slot Connectivity Options

Description1 Value for CTO Digit 8 Part Number
(if ordered separately)
None (No Pre-installed X-Slot card) 0 -
ConnectUPS-X Web/SNMP/xHub Card 3 116750221-001
Modem Card 7 05146288-5501
Modbus Card 4 103005425-5591
Relay Card (AS/400 compatible) 5 1018460
Industrial Relay and Display Card2 6 103003055
CAN Bridge Parallel Card N/A 103004336

1. The UPS has two X-Slots. One card can be factory installed while the second X-Slot card can be purchased separately.
2. 5A @ 250V. Provides (4) form-C relay contacts for integrating UPS alarms into security and alarm systems. Also provides signal information for the Remote Monitor Display Panel (part number 103002687-001).