Eaton 9355 UPS 10-15 kVA Technical Specs

Battery Runtimes
Model Selection Guide
Power Distribution Module
Options
X-Slot Connectivity Options
Technical Specifications for 10 and 15 kVA1
Power
Ratings (kVA/Watts) 10 kVA/9 kW and 15 kVA/13.5 kW at 0.9 power factor
Topology Double conversion
Electrical Input
Nominal input voltage  208V/120V or 220V/127V three-phase 400V models also available
Input voltage range  -15%, +10% from nominal at 100% load without depleting battery
Operating frequency  50/60 Hz (45 to 65 Hz)
Input power factor  >0.99 typical, >0.96 frequency converter
Input current distortion  5% THD
Electrical Output
Nominal output voltage   208/120, 220/127 Vac
Output voltage regulation ±1% static; ±5% dynamic at 100% resistive load change, <1 ms response time
Efficiency 91%, typical
Heat dissipation (BTU/hr) 10 kVA models:
3,798 @ 208V and 220V input
6,294 @ 480V and 600V (with input isolation transformer)
15 kVA models:
5,122 @ 208V and 220V input
8,134 @ 480V and 600V (with input isolation transformer)
Battery
Battery type 9 Ah, sealed, lead-acid, maintenance-free
Battery runtime See battery backup time chart
Battery replacement Field-replaceable
Charger Default is 3.4A per battery string. Charger current is configurable from 0.5A to 25A per string with an overall maximum of 34A (limited by input current)
Start-on-battery Allows start of UPS without utility input
General
Diagnostics Full system self-test at startup
UPS bypass Automatic on overload or UPS failure
Parallel for redundancy Yes, using Powerware Hot Sync technology and capacity
Dimensions and weights See model selection table
Overload (normal operation) 150% for 5 sec / 125% for 1 min (online),
110% for 10 min
Communications
LCD display Graphical LCD with blue backlight
LEDs  (4) LEDs for notice and alarm
Audible alarms Yes
Communication ports (1) RS-232, (1) relay contact, (1) REPO,
(2) environmental input
Communication slots (2) X-Slot communication bays
Power management software Bundled Software Suite CD
Environmental
Operating temperature 50–104ºF (10–40ºC), 45ºC with 7.5% derating; Optimal battery performance: 77ºF (25ºC)
Storage temperature 32–77ºF (0–25ºC); Recommended battery storage: 59–77ºF (15–25ºC)
Relative humidity 0–95%, non-condensing
Audible noise <56 dBA at 1 meter (noiseless room) typical
Altitude 9,843 ft. (3000m) without derating
Certifications
Safety certifications IEC 62040-1-1, IEC 60950, EN 62040-1-1, UL 1778
EMC compliance EN 50091-2 Class A
Quality ISO 9001: 2000 and ISO 14001:1996
Markings UL, cUL

1. Due to continuous product improvements, program specifications are subject to change without notice.

Battery Run Times (in minutes)

 VA  Watt  UPS
 + Internal
32 Battery
 (1) EBM 64  (2) EBM 64  (3) EBM 64  (4) EBM 64  UPS
 + Internal
64 Battery
 (1) EBM 96  (2) EBM 96  (3) EBM 96
 15000 13500 5 23 43 65 89 13 43 77 113
14500 13050 5 24 45 68 93 14 45 81 119
14000 12600 5 25 47 72 97 15 47 84 125
13500 12150 6 26 49 75 102 16 49 88 130
13000 11700 6 28 52 78 106 17 52 92 136
12500 11250 6 29 54 82 111 18 54 96 142
12000 10800 7 30 57 86 116 19 57 101 149
11500 10350 7 32 59 90 122 19 59 106 156
11000 9900 7 33 62 94 129 20 62 111 164
10500 9450 8 35 66 100 136 21 66 117 174
10000 9000 8 37 70 106 144 23 70 124 184
9500 8550 9 40 74 112 153 24 74 132 196
9000 8100 10 42 79 120 163 26 79 141 209
8500 7650 11 46 85 129 175 28 85 152 225
8000 7200 12 49 92 139 189 30 92 164 242
7500 6750 13 53 100 151 205 32 100 178 263
7000 6300 15 58 109 164 224 35 109 194 286
6500 5850 16 64 119 180 245 39 119 212 314
6000 5400 18 70 131 198 270 43 131 234 346
5500 4950 20 78 145 220 300 47 145 259 383
5000 4500 22 87 162 245 334 53 162 289 428
4500 4050 25 97 182 276 376 59 182 325 -
4000 3600 29 110 207 313 426 67 207 369 -
3500 3150 33 127 238 359 - 77 238 423 -
3000 2700 38 148 277 418 - 90 277 - -
2500 2250 46 176 329 - - 107 329 - -

Note: Backup times are approximate and may vary with equipment, configuration, battery age, temperature etc.

Model Selection Table

Power
Rating (kVA/kW)1
Description Input/Output
Voltage
Part Number2 Base Runtime Dimensions
(HxWxD, in.)
Weight
(lb.)3
10 / 9 2-high w/32 battery 208/208 KA1011100000010 8 32.2 x 12.0 x 33.5 373.0
10 / 9  3-high w/64 battery 208/208 KA1012100000010 22 47.8 x 12.0 x 33.5 609.0
10 / 9 2-high w/32 battery 220/2204 KA1011200000010 8 32.2 x 12.0 x 33.5 373.0
10 / 9 3-high w/64 battery 220/2204 KA1012200000010 22 47.8 x 12.0 x 33.5 609.0
10 / 9 3-high w/32 battery and input isolation transformer 480/208 KA1013400000010 8 47.8 x 12.0 x 33.5 577.0
10 / 9 3-high w/32 battery and input isolation transformer 600/208 KA1013600000010 8 47.8 x 12.0 x 33.5 577.0
15 / 13.5 2-high w/32 battery 208/208 KA1511100000010 4 32.2 x 12.0 x 33.5 373.0
15 / 13.5 3-high w/64 battery 208/208 KA1512100000010 13 47.8 x 12.0 x 33.5 609.0
15 / 13.5 2-high w/32 battery 220/2204 KA1511200000010 4 32.2 x 12.0 x 33.5 373.0
15 / 13.5 3-high w/64 battery 220/2204  KA1512200000010 13 47.8 x 12.0 x 33.5 609.0
15 / 13.5 3-high w/32 battery and input isolation transformer 480/208 KA1513400000010 4 47.8 x 12.0 x 33.5 577.0
15 / 13.5 3-high w/32 battery and input isolation transformer 600/208 KA1513600000010 4 47.8 x 12.0 x 33.5 577.0

1. 50/60 Hz auto-sensing.
2. An input neutral is required for all configurations unless the input isolation transformer is used. For parallel systems, change the fifth configure-to-order (CTO) digit to a 2 and include parallel tie cabinet.
3. Add 47 lb. for two-high configurations or 50 lb. for three-high configurations to determine shipping weight.
4. 220V units are wye connected 220/127V input and 220/127V output, three-phase, four-wire plus ground.

Power Distribution Module with Mechanical Bypass Switch

NEMA Output Receptacle(s)1
Quantity
Breaker Voltage (V) Receptacle Code 2 Phase(s) Enter “Receptacle Code”
into CTO Digits #
(1) L15-30R 30A 208 2 3 9, 10 or 11 only
(1) L21-20R 20A 208/120 3 3 9, 10 or 11 only
(1) L21-30R 30A 208/120 4 3 9, 10 or 11 only
(2) 5-15R 15A 120 A 1 9,10,11,12
(2) 5-20R UL 20A 120 B 1 9,10,11,12
(2) 6-15R 15A 208 D 2 9,10,11,12
(2) 6-20R 20A 208 E 2 9,10,11,12
(2) L5-15R 15A 120 F 1 9,10,11,12
(1) L5-20R* 20A 120 G 1 9,10,11,12
(1) L5-30R* 30A 120 H 1 9,10,11,12
(2) L6-15R 15A 208 I 2 9,10,11,12
(1) L6-20R* 20A 208 J 2 9,10,11,12
(1) L6-30R* 30A 208 K 2 9,10,11,12
(1) L14-20R* 20A 120/208 L 2 9,10,11,12
(1) L14-30R* 30A 120/208 M 2 9,10,11,12
Blank panel N/A N/A X N/A 9,10,11,12
(2) IEC 320 C13 (120V) 20A 120 N 1 9,10,11,12
(2) IEC 320 C19 (120V) 20A 120 P 1 9,10,11,12

1. The combined quantities of LOCKING receptacles (denoted by *) must not exceed four per unit.1. Arrange receptacle codes in numerical-alphabetical order in digits 9 through 12 of the CTO number. Example 1: A PDM with an L21-20, an L14-30, and Qty 2 IEC320-C19 would have digits 9 through 12 of the CTO arranged as "3MPP". Example 2: A PDM with a 5-15R, and an L6-30 and an L14-30 would have digits 9 through 12 of the CTO arranged as “AKMX”. Please be sure utilize the "X" designation for any of the four total slots not populated.

Options

Description Part Number Input/Output
Voltage (V)
Dimensions (H x W x D, inches) Weight (lb)
Two-high line and match battery module (64 batteries) 103004192-5501 N/A 32.2 x 12 x 30.2 480
Three-high line and match battery module (96 batteries) 103004193-5501 N/A 47.8 x 12 x 30.2 710
Wall-mount parallel tie cabinet (2-Breaker MBP)1, 3 124100020-001 N/A 36 x 20 x 5.8 68
Wall-mount Remote EPO Switch 103002939 N/A 4.5 x 4.5 x 4.5 3
Zone 4 Seismic Mounting Kit 103004194-5501 N/A - -
Remote monitor display panel2 103002687-001 N/A 4.9 x 5.9 x 1.6 3
Spare parts kit 106711169 N/A N/A N/A
10 to 15 kVA upgrade 103004657 N/A N/A N/A
Upgrade to a parallel UPS module UP08N-PAR1 N/A N/A N/A
Three-breaker maintenance bypass panels
100A Bus, 200A Neutral, & 60A MBP, MIB, MIS3 124100027-001 208/208 48 x 20 x 5.8 120
With integral 120 KA TVSS (100A Bus, 200A Neutral, and 60A MBP, MIB, MIS)3 124100027-002 208/208 60 x 20 x 5.8 120
With 36-pole distribution provisions
(Cutler-Hammer GHB 65 kAIC, or GBHW 22 kAIC and BAB 10 kAIC only)3
124100027-003 208/208 72 x 20 x 5.8 210
With 36-pole distribution provisions and integrated TVSS
(Cutler-Hammer GHB 65 kAIC, GBHW 22 kAIC and BAB 10 kAIC only)3
124100027-004 208/208 90 x 20 x 5.8 225

1. 208V/208V input/output voltage. 225A bus, 200A neutral, (1) 225A MBP and (4) 80A MIS.
2. Requires Industrial Relay and Display Card. See X-Slot Connectivity
3. Add 40 lb. for shipping weight of panels and 50 lb. for panels with panelboard provisions.

X-Slot Connectivity Options

Description1 Value for CTO Digit 8 Part Number
(if ordered separately)
None (No Pre-installed X-Slot card) 0 -
ConnectUPS-X Web/SNMP/xHub Card 3 116750221-001
Modem Card 7 05146288-5501
Modbus Card 4 103005425-5591
Relay Card (AS/400 compatible) 5 1018460
Industrial Relay and Display Card2 6 103003055
CAN Bridge Parallel Card N/A 103004336

1. The UPS has two X-Slots. One card can be factory installed while the second X-Slot card can be purchased separately.
2. 5A @ 250V. Provides (4) form-C relay contacts for integrating UPS alarms into security and alarm systems. Also provides signal information for the Remote Monitor Display Panel (part number 103002687-001).